
Programming
50 025-9459E
On Hook Exits Privacy
This command Enables or Disables any remote from exiting privacy mode whenever its
handset is returned to the cradle.
Line Check
The Line Check command Enables or Disables the remotes from detecting a problem
with their data links to the radio interface. If this feature is enabled, and a remote is
unable to contact the radio interface for three minutes, it will display “No Radio Found”
in the bottom line of its LCD until the data link is restored.
Local Text Aliases
This command Enables or Disables the display of the text aliases programmed into the
radio interface. If this feature is enabled, each remote will display the text alias assigned
to the current group in radio interface programming and will not display certain radio
messages, such as Key lock, OST and Redial strings. If this feature is disabled, each
remote will display the text alias assigned to the current group in radio programming
along with the other radio display messages.
TX Time-out
This command sets the transmit time-out time. This parameter is the number of seconds
that a remote can continually key the radio before the radio interface will cancel transmit.
This can be set from 2 to 255 seconds in increments of 1 second. The feature can also be
disabled entirely by entering zero. The default is 55 seconds.
Note
For safety and reliability reasons, it is strongly recommended
that the transmit time-out time in the radio interface be set
shorter than the transmit time-out time in the radio, and that it
not be disabled.
Function keys and Keypad keys
The features listed in this section can be assigned to function keys and/or keypad keys.
Radio features are listed first, followed by remote features. To leave a key unused, assign
it the None function.
Radio Features
The radio features that can be assigned to keys are:
Comentários a estes Manuais