ZETRON 360 Manual de Instruções descarregar pdf (Página 22)

Installation

22 025-9459E

8. The external TX audio input utilized by the Zetron Model 360 is the DC-Coupled

low level “MI2” line permanently assigned to pin 6. To configure transmit audio

input:

a. Navigate to the Extended Function Menu, Modulation Line tab.

b. Set the MI2 Line/External PTT (Voice) field to Connect.

c. Set the Mic Line/MIC PTT field to Disconnect.

d. Set all others to Disconnect.

Note

The Mic Line/Mic PTT field should typically be set to

Disconnect. The user may set it to Connect if they have an

actual need to initiate a radio transmission by using a hand-held

microphone attached to the radio.

NX-700/NX-800 Radio Programming

These instructions provide the installer and user with a straightforward guide to getting

the radio and the Model 360 functional with basic settings. From these working settings,

advanced settings and fine-tuning can be accomplished later according to customer

requirements.

Note

When configuring a radio, the technician should start by setting

the radio to its default values and then change/verify the

parameters specifically mentioned in this manual.

The settings called out in the manual are required. Those

settings not mentioned should be left at their default values. This

will give you a basic configuration that is known to work.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 76 77

Sem comentários

ZETRON 360 Manual de Instruções Página 22