ZETRON 360 Manual de Instruções descarregar pdf (Página 41)

Setup

Windows XP



To install the software on a Windows XP machine:

1. From the distribution CD, double-click on the Install M360KA.bat file.

2. The batch file will execute the following actions:

a. Creates the C:\Dosbox folder and copies the Dosbox program into it

b. Creates the folder C:\Zetron\M360KA

c. Creates a link on the desktop called M360KA, using the following icon

3. Double-click on the desktop link for the M360KA. This will cause the following

to happen:

a. The CPU cycles setting is set to 481, which better emulates the clock speeds

of Windows 98-era machines

cycles=481

b. The ports for Serial 1 and Serial 2 are mapped to COM1 and COM2. (The

following two lines appear in the M360KA.conf file, which can be )

serial1=directserial realport:com1 startbps:9600 parity:n bytesize:8 stopbits:1

serial2=directserial realport:com2 startbps:9600 parity:n bytesize:8 stopbits:1

4. The autoexec batch file that was started by the clicking the desktop link ends by

starting the Model 360 DOS-based programming software. You can proceed to

configuring which COM port it should use. See Configuring the Programming

Software on

page 46.

In addition to the issue of not being able

to find a computer still running the DOS

operating system, many newer computers do not have serial ports available. It that case

you will need to use a third-party USB-to-Serial port convertor and configure the USB

port to answer up as COM1 or COM2.

Tip

Because Zetron has some experience with the Tripp Lite brand of

USB-to-Serial port convertor and was able to test it in this

application, it is recommended that you obtain one of these,

either from Zetron (part number 802-0487) or from you local

vendor of Tripp Lite products (manufacturer part number

U209-000-R).

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 76 77

Sem comentários

ZETRON 360 Manual de Instruções Página 41