ZETRON 360 Manual de Instruções descarregar pdf (Página 30)

Installation

30 025-9459E

Figure 5. Location of Jumpers in the Radio Interface

Remote Configuration

Configuring the remote consists of setting jumpers inside the product if necessary. The

installer configurable jumpers and their functions are described in Table 2 and Table 3.

Figure 6 shows the locations of the jum

pers on the remote main PCB.

Table 2. Configuration Jumpers on the Remote Main PCB (702-0007)

Jumper Purpose Positions

JP3 Supervisor

This jumper sets the remote as a supervisor or non-

supervisor. Supervisor remotes are not affected when

privacy mode is initiated by users at other remotes.

Furthermore, when a Supervisor remote initiates privacy

mode, it will not time out.

A - Not a Supervisor

B - Supervisor

JP4 Adjacent Deskset Muting

If this feature is enabled, the front panel speaker of the

remote will be muted when another remote is

transmitting. If multiple remotes are located in the same

room, enabling this feature prevents feedback.

A - Muting Disabled

B - Muting Enabled

JP6 Handset/Headset Earpiece

This jumper sets earpiece audio gain to the proper level

for either the handset or a headset.

A - Handset

B - Headset

JP7 Handset/Headset Mouthpiece

This jumper sets mouthpiece audio gain to the proper

level for either the handset or a headset.

A - Handset

B - Headset

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 76 77

Sem comentários

ZETRON 360 Manual de Instruções Página 30